Installation and set up of a local, wireless or a shared printer on WINDOWS

ADDING A LOCAL PRINTER

STEP 1.

Connect the printer to your computer using the USB cable and turn it on.

STEP 2.

Open the Settings app from the Start menu.

STEP 3.

Click on Devices.

STEP 4 .

Click Add a printer or scanner :

STEP 5 .

If Windows detects your printer, click on the name of the printer and follow the on-screen instructions to finish the installation. And you’re done.

If Windows doesn’t find your connected printer, click on “The printer that I want isn’t listed” link.

Then let the Windows troubleshooting guide help you find your printer. It will search for available printers and help you download the drivers for them.

ADDING A WIRELESS PRINTER

The steps to install a wireless printer may vary by manufacturer. In general, however, modern printers today will detect your network and automate the installation.

STEP 1:

Use the printer’s LCD panel to enter the wireless setup. For an Epson printer this is under Setup > Wireless LAN Settings.

STEP 2 :

Select your Wi-Fi network. 

STEP 3 :

 Enter your network password.

In some cases, you might need to temporarily connect your printer to your computer via USB to install software. But otherwise, that’s it. You should find your printer automatically added in the Printers & scanners section under Settings > Devices.

If you run into trouble, make sure your printer is relatively close to your computer and not too far from your wireless router. If your printer has an Ethernet jack, you could also connect it directly to your router and manage it with a browser interface.

ADDING A SHARED PRINTER :

STEP 1. 

Right-click on the wireless icon in the taskbar and select “Open Network and Sharing Center“.

STEP 2. 

Click “Ready to create” next to HomeGroup. If a HomeGroup already exists on your network, it will say “Joined.”

STEP 3. 

Click the Create a homegroup button.

STEP 4. Click Next.

STEP 5. Select what you want to be shared. Printers & Devices are shared by default.

STEP 6. Write down the HomeGroup password Windows creates for you. You’ll need it for each computer you want to join the HomeGroup.

STEP 7. Click Finish.

CONNECT TO A SHARED PRINTER ON A HOME GROUP :

Now head to the other computer(s) on your network to join the HomeGroup.

STEP 1.

 Click Homegroup and then the Join now button in Windows Explorer.

STEP 2.

 Click Next.

STEP 3.

 Verify what you want to share and click Next.

STEP 4.

 Enter the password and click Next.

STEP 5.

 Click Finish.

STEP 6.

 Click Network in Windows Explorer and you should see the shared printer installed.

Was This Article Helpful?

0
0 Comments

There are no comments yet

Leave a comment

Your email address will not be published. Required fields are marked *